 | Up a level |
Allsop, W. and Briggs, M. and Denziloe, T. and Skinner, A. (1994) Alderney breakwater: the quest for a final solution. Coastal Structures and Breakwaters (DOI: 1). pp. 303-319. ISSN 978-0-7277-4006-9
Cuomo, G. and Allsop, W. and Bruce, T. and Pearson, J. (2010) Breaking wave loads at vertical seawalls and breakwaters. Coastal Engineering, 57 (4). pp. 424-439.
Cuomo, G. and Allsop, W. and Takahashi, S. (2010) Scaling wave impact pressures on vertical walls. Coastal Engineering, 57 (6). pp. 604-609.
Cuomo, G. and Lupoi, G. and Shimosako, K. and Takahashi, S. (2011) Dynamic response and sliding distance of composite breakwaters under breaking and non-breaking wave attack. Coastal Engineering, 58 (10).
Cuomo, G. and Lupoi, G. and Shimosako, K. and Takahashi, S. (2011) Dynamic response and sliding distance of composite breakwaters under breaking and non-breaking wave attack. Coastal Engineering, 58. pp. 953-969.
Cuomo, G. and Piscopia, R. and Allsop, W. (2011) Evaluation of wave impact loads on caisson breakwaters based on joint probability of impact maxima and rise times. Coastal Engineering, 58 (1). pp. 9-27.
Cuomo, G. and Shimosako, K. and Takahashi, S. (2009) Wave-in-deck loads on coastal bridges and the role of air. Coastal Engineering, 56 (8).
De Chowdhury, S. and Zhou, J. and Khait, A. and Causon, D. and Qian, L. and Mingham, C. and Pullen, T.A. (2023) Local overshoot and wind effects on wave overtopping at vertical coastal structures. Proceedings of the Institution of Civil Engineers - Maritime Engineering, 176 (1).
Dunn, S. and Vun, P.L. and Chan, A.H.C. and Damgaard, J.S. (2006) Numerical modeling of wave-induced liquefaction around pipelines. Journal of Waterway, Port, Coastal, and Ocean Engineering, 132 (4).
Gerritsen, H. and Sutherland, J. and Deigaard, R. and Multu, S. and Fortes, J. and Sierra, J. and Schmidtke, U. (2011) Composite modelling of the interactions between beaches and structures. Journal of Hydraulic Research, 49 (Sup1). pp. 2-14.
Grey, S. and Cruickshank, I. and Beresford, P. and Tozer, N.P. (2010) The impact of navigation channels on berth protection. Proceedings of the Institution of Civil Engineers - Civil Engineering, 163 (5). pp. 49-54.
Hames, D. and Gouldby, B.P. and Hawkes, P. (2019) Evolution of joint probability methods in coastal engineering practice in the UK. Proceedings of the Institution of Civil Engineers - Maritime Engineering, 172 (2). pp. 45-54.
Marzeddu, A. and Gironella, X. and Sánchez-Arcilla, A. and Sutherland, J. (2014) Laboratory effects on measuring impact loads on rigid coastal structures. Proceedings of the 3rd IAHR Europe Congress, 2014, Porto -Portugal.. ISSN ISBN 978-989-96479-2-3
Simm, J.D. and Wallis, M. and Collins, K.J. and Atkins, R. (2007) Re-use of materials in coastal and river engineering - an overview. ICE Sustainability Journal, 157 (ES3). pp. 113-121.
Simm, J.D. and Winter, M. and Waite, S. (2008) Design and specification of tyre bales in construction. Proceedings of the Institution of Civil Engineers - Waste and Resource Management, 161 (2). pp. 67-76.
Whitehouse, R.J.S. and Sutherland, J. and Harris, J. (2011) Evaluating scour at marine gravity foundations. Proceedings of the Institution of Civil Engineers - Maritime Engineering, 164 (4). pp. 143-157.
Yelland, M. and Brown, J. and Cardwell, C. and Jones, D.S. and Pascal, R. and Pinnell, R. and Pullen, T.A. and Silva, E. (2023) A system for in-situ, wave-by-wave measurements of the speed and volume of coastal overtopping. Communications Engineering, 2.
Allsop, W. and Murfin, Q. and Sampson, C. (2011) Analysis and design of refurbishment for unusual damage to a rubble mound breakwater. In: Proceedings of the 6th International Conference on Coastal Structures. World Scientific Publishing Company Pte Ltd.
Cantelmo, C. and Dunn, S. and Cuomo, G. and Allsop, W. (2011) Hydro-geotechnical stability of rubble mound breakwaters under wave action. In: Proceedings of the 6th International Conference on Coastal Structure. World Scientific Publishing Company Pte Ltd.
Cuomo, G. and Polidoro, A. and Pasquini, E. and Alderson, J. and Robinson, D. and Allsop, W. and Dunn, S. (2011) Wave loading, overtopping and transmission of low crest caisson breakwaters. In: Proceedings of the 6th International Conference on Coastal Structures. World of Scientific Publishing Company Pte Ltd.
Richardson, S. and Pullen, T.A. and Clarke, S. (2002) Jet velocities of overtopping waves on sloping structures: measurements and computation. In: International Conference on Coastal Engineering 2002. ICCE.
Whitehouse, R.J.S. and Harris, J. and Mundon, T. and Sutherland, J. (2010) Scour at offshore structures. In: Proceedings of the Fifth International Conference on Scour and Erosion (ICSE-5). American Society of Civil Engineers.
Allsop, W. (1988) Concrete armour units for rubble mound breakwaters and sea walls: recent progress. Technical Report. Hydraulics Research Wallingford.
Allsop, W. and Bradbury, A. and Poole, A. and Dibb, T. and Hughes, D. (1985) Rock durability in the marine environment. Technical Report. Hydraulics Research Wallingford.
Allsop, W. and Calabrese, M. (1999) Forces on vertical breakwaters - Effects of oblique or short-crested waves. Technical Report. HR Wallingford.
Allsop, W. and Hawkes, P. and Jackson, F. and Franco, L. (1985) Wave run-up on steep slopes - model tests under random waves. Technical Report. Hydraulics Research Wallingford.
Allsop, W. and Herbert, D.M. (1991) Single layer armour units for breakwaters. Technical Report. HR Wallingford.
Allsop, W. and Jones, R.J. (1995) Guidelines for single layer hollow cube armour systems for breakwaters and related marine structures. Technical Report. HR Wallingford.
Allsop, W. and Jones, R.J. (1994) Stability of rock armoured beach control structures. Technical Report. HR Wallingford.
Allsop, W. and Vicinanza, D. and McKenna, J. (1995) Wave forces on vertical and composite breakwaters. Technical Report. HR Wallingford Ltd.
Allsop, W. and Williams, A. (1991) Hydro-geotechnical performance of rubble mound breakwaters. Technical Report. HR Wallingford Ltd.
Allsop, W. and Wood, L. (1987) Hydro-geotechnical performance of rubble mound breakwaters - a literature review. Technical Report. Hydraulics Research Wallingford.
Bradbury, A. and Allsop, W. and Latham, J-P. and Mannion, M. and Poole, A. (1988) Rock armour for rubble mound breawaters, sea walls, and revetments: recent progress. Technical Report. Hydraulics Research Wallingford.
Bradbury, A. and Allsop, W. and Stephens, R. (1988) Hydraulics performance of breakwater crown walls. Technical Report. Hydraulics Research Wallingford.
Brampton, A. and Goldberg, D.G. (1991) Mathematical model of groynes on shingle beaches. Technical Report. HR Wallingford.
Brampton, A. and Smallman, J.V. (1985) Shore protection by offshore breakwaters. Technical Report. Hydraulics Research Wallingford.
Crossman, M. and Simm, J.D. (2004) Manual on the use of timber in coastal and river engineering. Technical Report. Thomas Telford.
Gasowski, Y. and Cooper, A. (1999) Improved prediction of 3D flows at structures. Technical Report. HR Wallingford.
HR Wallingford, - (1991) Rock armouring for coastal and shoreline structures: hydraulic model studies on the effects of armour grading (EX 1989). Technical Report. HR Wallingford.
HR Wallingford, - (1986) The effectiveness of groyne systems. Physical model study of groynes on a beach (EX 1351). Technical Report. HR Wallingford Ltd.
Herbert, D.M. (1996) The overtopping of seawalls A comparison between prototype and physical model data. Technical Report. HR Wallingford.
Hydraulics Research Station, - (1980) Design of seawalls allowing for wave overtopping. Technical Report. Hydraulics Research Station (HRS).
Hydraulics Research Wallingford, - (1985) Guide to concrete dyke revetments. Technical Report. Hydraulics Research Wallingford.
Hydraulics Research Wallingford, - (1987) Heacham revetment survey. Technical Report. Hydraulics Research Wallingford.
Hydraulics Research Wallingford, - (1990) Long term variations in shoreline wave conditions around the United Kingdom - interim report (SR 238). Technical Report. Hydraulics Research Wallingford.
Hydraulics Research Wallingford, - (1987) The effectiveness of saltings. Technical Report. Hydraulics Research Wallingford.
Hydraulics Research Wallingford, - (1986) A macro-review of the coastline of England and Wales - 2 the East Coast. The Tees to The Wash (SR 107). Technical Report. Hydraulics Research Wallingford.
Jelliman, C. and Hawkes, P. and Brampton, A. (1991) Wave climate change and its impact on UK coastal management. Technical Report. HR Wallingford.
Mann, K. (1991) Sedimentation at jetties. Technical Report. HR Wallingford.
McConnell, K. (1998) Revetment systems against wave attack: A design manual. Technical Report. Thomas Telford.
Mockett, I. and Simm, J.D. (2002) Risk levels in coastal and river engineering - a guidance framework for design. Technical Report. HR Wallingford.
Motyka, J.M. and Beven, S. (1986) A macro-review of the coastline of England and Wales - 1 the North East. St Abb's Head to the Tees. Technical Report. Hydraulics Research Wallingford.
Motyka, J.M. and Welsby, J. (1984) A review of novel shore protection methods - inspection of sea defences in Holland and Belgium, 17 to 21 September 1984. Technical Report. Hydraulics Research Wallingford.
Motyka, J.M. and Welsby, J. (1987) A review of novel shore protection methods - volume 6: final report. Technical Report. Hydraulics Research Wallingford.
Owen, M. and Steele, A. (1993) Effectiveness of recurved wave return walls. Technical Report. HR Wallingford.
Pendle, M. (2013) Estuarine and coastal managed realignment sites in England - A comparison of predictions with monitoring results for selected case studies. Other. HR Wallingford Ltd. (Unpublished)
Powell, K.A. (1987) Toe scour at sea walls subject to wave action - a literature review. Technical Report. Hydraulics Research Wallingford.
Powell, K.A. and Allsop, W. (1985) Low-crest breakwaters, hydraulic performance and stability. Project Report. Hydraulics Research Wallingford.
Powell, K.A. and Allsop, W. and Owen, M. (1985) Design of concrete block revetments subject to wave action - a literature review. Technical Report. Hydraulics Research Wallingford.
Simm, J.D. and Wallis, M. (2004) Sustainable re-use of tyres in port, coastal and river engineering. Guidance for planning, implementation and maintenance. Project Report. DTI/Environment Agency.
Simons, R. (1999) Assessment of the stability of bed material adjacent to marine structures - The effects of breaking waves, turbulence, and vortex-shedding. Technical Report. HR Wallingford.
Smallman, J.V. (1988) Mathematical models of wave refraction, and diffraction by island breakwaters. Technical Report. Hydraulics Research Wallingford.
Smallman, J.V. (1985) Wave action at a series of offshore breakwaters: a mathematical model of wave diffraction and overtopping. Technical Report. Hydraulics Research Wallingford.
Smallman, J.V. (1988) A mathematical model of diffraction by breakwaters in random waves. Technical Report. Hydraulics Research Wallingford.
Smallman, J.V. and Tozer, N.P. and Jones, D.K. (1989) Mathematical modelling of wave climate near offshore breakwaters. Technical Report. Hydraulics Research Wallingford.
Stewart, T. and Newberry, S. and Latham, J-P. and Simm, J.D. (2003) Packing and voids for rock armour in breakwaters. Technical Report. HR Wallingford.
Welsby, J. and Motyka, J.M. (1987) A macro review of the coastline of England and Wales - volume 4: the Thames to Selsey Bill. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1989) A macro review of the coastline of England and Wales - volume 5 the south coast. Selsey Bill to Portland Bill. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1989) A macro review of the coastline of England and Wales - volume 6: the South West Coast. Portland Bill to Avonmouth. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1989) A macro review of the coastline of England and Wales - volume 7: Wales - River Wye to the Great Orme, including Anglesey. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1989) A macro review of the coastline of England and Wales - volume 8: the North West - the Great Orme to the Solway Firth. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1984) A review of novel shore protection methods - volume 3: gabions. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1987) A review of novel shore protection methods - volume 4: revetments. Technical Report. Hydraulics Research Wallingford.
Welsby, J. and Motyka, J.M. (1987) A review of novel shore protection methods - volume 5: offshore breakwaters and sills - text. Technical Report. Hydraulics Research Wallingford.
Yarde, A. and Banyard, L. and Allsop, W. (1996) Reservoir dams: wave conditions, wave overtopping and slab protection. Technical Report. HR Wallingford.
Alderson, J. and Cuomo, G. and Allsop, W. (2008) Why do suspended deck coastal structures keep failing. In: International Conference on Forensic Engineering 2008, 2 - 4th December 2008, London.
Allsop, W. (2012) Coastal storm hazards, extreme loads and threats from tsunami. In: Natural hazards: a proportionate response, 3 May 2012, London. (Unpublished)
Allsop, W. (2010) Historical experience of vertical breakwaters (in the UK). In: Vernon Harcourt 2010, 22 February 2010, ICE London.
Allsop, W. (2009) Historical experience of vertical breakwaters in the United Kingdom. In: ICE Coasts, Marine Structures and Breakwaters 2009, 16-18 September 2009, EICC, Scotland.
Allsop, W. and Cork, S. and Jan Verhagen, H. (2009) A database of major breakwaters around the world. In: ICE Coasts, Marine Structures and Breakwaters 2009, 16-18 September 2009, EICC, Scotland.
Allsop, W. and Cork, S. and Verhagen, H.J. (2010) A database of major breakwaters around the world. In: PIANC MMX, 10-14 May 2010, Liverpool, UK.
Baxter, G. and Andrysewski, T. and Banks, J. and Sayers, P. and Simm, J.D. and Wallis, M. (2010) Performance-based Asset Management (PAMS) project – What has it delivered? How will we use it? Where next? In: Defra Flood and Coastal Management Conference 2010, 29 June - 1 July 2010, Telford.
Besley, P. and Denechere, M. (2009) Single layer armour systems: toe, crest and roundhead details. In: ICE Coasts, Marine Structures and Breakwaters 2009, 16-18 September 2009, EICC, Scotland.
Broekens, R. and Escarameia, M. and Cantelmo, C. and Woolhouse, G. (2011) Quantifying the carbon footprint of coastal construction – a new tool HRCAT. In: ICE Coastal Management 2011, 15-17 November 2011, Belfast.
Brown, J. and Yelland, M. and Pascal, R. and Jones, D. and Cardwell, C. and Pinnell, R. and Walk, J. and Pullen, T.A. and Darroch, L. and Gardner, T. (2023) An innovative wave overtopping measurement system to calibrate numerical flood hazard assessment and alert tools. In: ICE Breakwaters 2023, 25-27 April 2023, Portsmouth, UK.
Cozzuto, G. and Dimakopoulos, A. and de Lataillade, T. and Kees, C. (2017) CFD modelling of coastal engineering applications using Proteus toolkit. In: YCSEC 2017, 11-12 April 2017, Bath, UK.
Cuomo, G. and Hancock, D. and Richardson, S. and Longo, D. and Rigden, T. and Dimakopoulos, A. (2013) Rehabilitation of Hartlepool town wall. In: ICE Coasts, Marine Structures and Breakwaters 2013, 18-20 September 2013, Edinburgh, UK.
Dupray, S. and Gamst, K. and Woods-Ballard, B. (2010) New guidance for the use of concrete in maritime engineering. In: PIANC MMX, 10-14 May 2010, Liverpool, UK.
Elliott, C. and Brampton, A. and Wallis, M. (2004) The potential use of alternatives to primary aggregates in coastal and river engineering. In: Defra Flood and Coastal Management Conference 2004, June 29 - July 1 2004, University of York, UK.
Herbert, D.M. and Owen, M. (1995) Wave overtopping of sea walls - Further research. In: International Conference on Advances in Coastal Structures and Breakwaters, 27-29 April, London, UK.
McConnell, K. and Scott, M. and Simm, J.D. (2005) Update of the manual on the use of rock in hydraulic engineering ('The Rock Manual'). In: Defra Flood and Coastal Management Conference 2005, 5 - 7 July 2005, York, UK.
Richardson, S. and Cuomo, G. and Dimakopoulos, A. and Longo, D. (2013) Coastal structure optimisation using advanced numerical methods. In: ICE Coasts, Marine Structures and Breakwaters 2013, 18-20 September 2013, Edinburgh, UK.
Simm, J.D. and Gouldby, B.P. and Sayers, P. and Flikweert, J. and Wersching, S. and Bramley, M. (2008) Representing fragility of flood and coastal defences: Getting into the detail. In: FLOODrisk 2008, 30 September - 2 October 2008, Keble College, Oxford, UK.
Simm, J.D. and Wallis, M. and Hedges, T. and Bethan, E. and Brampton, A. (2003) Developments in the use of recycled and secondary materials in coastal structures. In: ACSE Conference on Coastal Structures, 2003, Portland, USA.
Sutherland, J. and Barfuss, S. (2011) Composite Modelling, combining physical and numerical models. In: IAHR World Congress 2011, 26 June - 1 July 2011, Brisbane, Australia.
Sutherland, J. and Brampton, A. and Whitehouse, R.J.S. (2006) Toe scour at seawalls: Monitoring, prediction and mitigation. In: 41st Defra Flood and Coastal Management Conference, 4 - 6 July 2006, York, UK.
Sutherland, J. and Obhrai, C. and Whitehouse, R.J.S. and Pearce, A. (2006) Laboratory tests of scour at a seawall. In: ICSE 2006 (3rd International Conference on Scour and Erosion), 3-5 July 2007, Gouda, The Netherlands.
Tozer, N.P. and Pullen, T.A. and Saulter, A. and Kendall, H. (2013) The coastal wave and overtopping forecast service for Network Rail Scotland. In: ICE Coasts, Marine Structures and Breakwaters 2013, 18-20 September 2013, Edinburgh, UK.
Tozer, N.P. and Saulter, A. and Pryor, S. and Coates, T. (2009) Marine forecasts for the safe construction and maintenance of coastal structures. In: ICE Coasts, Marine Structures and Breakwaters 2009, 16-18 September 2009, EICC, Scotland.
Via Estrem, L. and Pullen, T.A. and Stewart, T. and Allsop, W. (2013) Damage to rubble mound breakwaters – Extracting design guidance from ‘old’ test data. In: ICE Coasts, Marine Structures and Breakwaters 2013, 18-20 September 2013, Edinburgh.
Wallis, M. and Whitehouse, R.J.S. and Lyness, N. (2009) Development of guidance for the management of the toe of coastal defence structures. In: ICE Coasts, Marine Structures and Breakwaters 2009, 16-18 September 2009, EICC, Scotland.
Wallis, M. and Whitehouse, R.J.S. and Lyness, N. (2009) Development of guidance for the management of the toe of coastal defence structures. In: 44th Defra Flood and Coastal Management Conference, 30th June - 2nd July 2009, Telford, UK.
Whitehouse, R.J.S. (2006) Scour at coastal structures. In: ICSE 2006 (3rd International Conference on Scour and Erosion), 1-3 November 2006, Amsterdam, The Netherlands.
Young, M. and Robinson, D. and Pullen, T.A. (2017) Caisson design for high storm conditions. In: ICE Coasts, Marine Structures and Breakwaters 2017, 5-7 September 2017, Liverpool, UK.
van Steeg, P. and Joosten, R. and Steendam, G. (2018) Physical model tests to determine the roughness of stair shaped revetments. In: Protections 2018 (3rd International Conference on Protection against Overtopping), 6-8 June 2018, Grange-over-Sands, UK.
van der Meer, J. and van Hoven, A. and Steendam, G. and Hoffmans, G. (2018) Hydraulic simulators on real dikes and levees. In: Protections 2018 (3rd International Conference on Protection against Overtopping), 6-8 June 2018, Grange-over-Sands, UK.
